Avocent MergePoint Unity, Инструкция по установке и эксплуатации

Страница: 38 / 97

Setting Description
Virtual Media
Access per IQ
Module:
Enable
VM/Disable
VM
If the MergePoint Unity switch supports virtual media, the Virtual Media Access per IQ Module
section lists all USB2 or PS2M IQ modules. The list includes details about each IQ module,
including a virtual media status of Enabled or Disabled. You can either enable or disable virtual
media for each IQ module. If the KVM switch does not support virtual media, this section and
associated buttons and links are not displayed.
To set virtual media options:
1. From the side navigation bar, select Unit Views - Appliance - Appliance Settings - Sessions
- Virtual Media to open the Appliance Virtual Media Session Settings screen.
2. Either enable or disable the Virtual Media locked to KVM Sessions checkbox.
3. Either enable or disable the Allow Reserved Sessions checkbox.
4. Select one of the following options from the Virtual Media Access Mode from the drop-
down menu: Read-Only or Read-Write .
5. Select one of the Encryption Levels that you wish to be supported.
6. Select the checkbox next to each IQ module for which you want to enable virtual media
and click Enable VM .
-or-
Select the checkbox next to each IQ module for which you want to disable virtual
media and click
Disable VM .
7. Click Save .
Local virtual media settings
Local users can also determine the behavior of virtual media from the Local Session screen. In
addition to connecting and disconnecting a virtual media session, you can configure the
settings in the following table.
Table 3.5: Local Virtual Media Session Settings
Setting Description
CD ROM
Allows virtual media sessions to the first detected CD-ROM or DVD drive. Enable this
checkbox to establish a virtual media CD-ROM or DVD connection to a target device.
Disable to end a virtual media CD-ROM or DVD connection to a target device.
30 MergePoint Unity® Switch Installer/User Guide