Avitech Rainier 3G Plus, Руководство пользователя

Страница: 76 / 147

70

General

General

Video Black Threshold Unit
Set the level (in IRE or mV ) below which the signal will be considered to be black. Click the drop-
down button [click the Video Black Threshold Unit
cell’s rightmost portion] to select
IRE or mV .
IRE is a unit used in the measurement of composite video signals. Its name is an abbreviation of Institute of
Radio Engineers. mV stands for millivolt.
Figure 5-30
Options: “System”  ”General”  ”Video Black Threshold Unit”

General

General

HDMI Audio Output Follow SDI / SPDIF Audio Output
To make the HDMI audio output the same as the SDI audio output ( Properties portion
–
Card
Parameters

Headphone (Local)

Source ), make sure HDMI Audio Output Follow SDI /
SPDIF Audio Output is enabled (set On ). Click the drop-down button [click the HDMI Audio
Output Follow SDI / SPDIF Audio Output
cell’s rightmost portion] to select
On .
Figure 5-31
Options: “System”  ”General”  ”HDMI Audio Output Follow SDI / SPDIF Audio Output”