72
6.2.1
Multi-monitor Workstation with Quad-view Display
In a multi-monitor workstation where SOB-QPW is grouped with other full-screen outputs (SOB-H,
SOB-T, or SOB-HPW in Seamless mode), the Pacific MS allows any of the quad-view source window to
be duplicated onto selected full-screen display(s). This enables simultaneous and continuous
monitoring over numerous sources, where any source requiring additional attention can be closely
monitored and controlled on a separate full-screen display.
The Pacific MS automatically senses the constitution of the configured multi-monitor workstation. When
the workstation consists of any combination of SOB-QPW and other full-screen outputs, upon moving
the Host cursor to the top-right corner of a window, the following pop-up selections will appear instead of
the conventional ones:
1: duplicates a window onto the first full-screen display
2: duplicates a window onto the second full-screen display
3: duplicates a window onto the third full-screen display
Full screen: sets a window to full screen
Restore: returns from a full-screen view to the previous quad-view layout
The followings give examples of assigning selected source windows from the quad-view display(s) to
other full-screen displays of the same workstation using the
,
, and
pop-up selections.
Figure 6-26
Multi-monitor Workstation with One Quad and One Full Screen Display
Figure 6-27
Multi-monitor Workstation with One Quad and Two Full Screen Displays
Figure 6-28
Multi-monitor Workstation with Two Quad and Two Full Screen Displays
Figure 6-29
Multi-monitor Workstation with One Quad and Three Full Screen Displays
