53
Figure 4-25
In-System GUI Display and Control for Pacific MS Module 2
1. The local computer in cascade with the Pacific MS is detected as an external device rather than a
Pacific MS module. As a result, a different hot-key combination is used for switching control to this
computer.
2. In case of having fewer than three Pacific MS modules in a cascaded system, clicking the unused
module(s) on the GUI menu will not incur display nor control switching.
Step 3. To switch control to the local computer, use the Ctrl + Shift + F12 keyboard hot-key
combination. The monitor will switch to display the local computer while mouse/keyboard
control will automatically transfer to the computer. Use hot-key combinations in step 2 and 3 to
switch control between the Pacific MS modules and the local computer.
Figure 4-26
Local Computer Display and Control
The following table provides a summary of available hot-key combinations for switching between the
Pacific MS or the local computer in a cascaded system:
Hot-keys
Ctrl
+
Shift
+
F1
Switches monitoring and mouse/keyboard control to the first Pacific MS
module in cascade.
Ctrl
+
Shift
+
F2
Switches monitoring and mouse/keyboard control to the second Pacific
MS module in cascade.
Ctrl
+
Shift
+
F3
Switches monitoring and mouse/keyboard control to the third Pacific MS
module in cascade.
Ctrl
+
Shift
+
F12
Switches monitoring and mouse/keyboard control to the local computer
system.
Table 4-4
Available Hot-keys for a Cascaded System
