34
Figure 3-16
In-System GUI: Default KM Assign for Pacific MS-2
Step 2. To change KM routing for Input 1-1 (SIB-H (1) in this case) from the default, select the KM port
from its drop-down menu that matches the actual cabling setup. A rule of thumb to set KM
routing is to ensure that a video input and the to-be-assigned KM port are connected to the
same source computer. For example, with the following installation, the KM routing should be
configured accordingly:
Figure 3-17
In-System GUI: Custom KM Assign following Cabling Setup
Step 3. Repeat step 2 for any other KM routes to be changed.
Step 4. Click Apply to confirm changes made to KM routing (or click OK to confirm and exit the KM
Assign screen directly).
1. KM ports that have already been assigned will not appear on the drop-down menu for selection.
2. Clicking Clear on the KM Assign screen will disable all existing KM routes (“UNUSED”). To restore to
default KM settings, click Default on the same screen and then click Apply (or OK).
