Stereo Link DIP Switches
Eight Stereo Link DIP switches are provided allowing odd‑even channels to be paired for use with Aviom Pro16
personal monitoring products such as the A360, A‑16II, and A‑16R Personal Mixers. (This application requires the
ASI A‑Net Systems Interface.) Each DIP switch controls a pair of channels. Stereo Link information will be passed
to all Pro64 modules. If applicable, a Stereo Link LED will light on Pro64 output modules such as the analog 6416o
Output Module and 6416dio Digital I/O Module when stereo information is present in the network.
System Lock
When the 6416Y2 card is the Pro64 network Control Master, DIP switch 9 controls the Password Lock feature,
allowing all devices in the network to be locked from a single location. Unlike Pro64 hardware I/O devices, there is
no way to set a password code on the 6416Y2 card. The Pro64 network is locked/unlocked immediately when the
DIP switch is moved. No edits are possible when the network is locked.
m-control
Use DIP switch 10 on the 6416Y2 front panel to activate the m‑control™ for Yamaha Digital Consoles feature,
allowing remote control of 6416m Mic Input Module and AllFrame preamp settings such as gain, phantom power,
and low cut filter directly from the Yamaha user interface.
Local Code Update
The Local Code Update DIP switch is used in conjunction with Pro64 Network Manager’s firmware update utility.
This switch is scanned only when the host Yamaha device is powered up. Changing the position of this DIP switch
requires a reboot of the host device for the switch position to be recognized.
Control Master/Slave
DIP switch 12 is used to set the 6416Y2 card as either the network Control Master (down) or as a slave device
(up). Note that only one Pro64 device can be Control Master in a network. Although this DIP switch setting can
be changed on the fly, note that the Pro64 network will need to reset if a new Control Master device is selected.
Audio and control data are interrupted while the network resets.
A-Net Ports
Two Pro64 A‑Net ports are provided on the 6416Y2 card, labeled A and B. Each port has a Neutrik® EtherCon®
connector and can support standard RJ45 cables or those fitted with the heavy‑duty EtherCon plug.
Multiple 6416Y2 cards can be used in compatible Yamaha devices by linking them together via the A‑Net ports
with a short Cat‑5e or Cat‑6 jumper cable.
Front Panel LEDs
A set of five LEDs on the front panel of the 6416Y2 card is used to inform the user of various network conditions
and/or error states as described below.
23
c
ard
c
omPonents
