Aviom 6416YZ Скачать руководство пользователя страница 15

Страница: 15 / 92

Irmware

otIce

irmWare

otice

All Pro64 devices in a network should be updated to use the most recent firmware version to ensure

trouble-free operation.

As new Pro64 devices are released, older Pro64 products need to be updated so that they recognize the features

and functions of the newer modules—something that is especially important if one of the older devices will be

used as the network’s Control Master.

Pro64 Network Manager

is a free Windows software application designed for editing and managing your Pro64

devices; it also includes a built‑in utility for updating the firmware in Pro64 Series products. The current version of

Pro64 Network Manager can be downloaded from the Aviom website.

ote

AllFrame devices in a Pro64 network require the Pro64 Network Manager application for all I/O routing

and channel programming. There is no front panel user interface.

Pro64 Network Manager requires a direct RS‑232 (serial) connection between the computer and the Control

Master device on the Pro64 network. Normally this is accomplished by connecting a null modem DB9 cable

between the RS‑232 jack on the computer and the Pro64 device. Complete information on using RS‑232 (and

USB‑to‑RS‑232 adapters) is available on the Aviom website. Updates take just a few minutes per module.

The AllFrame F6 Modular I/O Frame includes a USB connector on its front panel for connecting a computer when

the device is used as the network’s Control Master. No DB9 RS‑232 cable is required when using the F6 as a Control

Master.

Pro64 Network Manager is designed to run on a PC under Microsoft® Windows® XP, Vista, or Windows 7. There

is no official Apple Mac support. However, Mac users can run Pro64 Network Manager using Windows running

under Apple’s Boot Camp or Parallels programs on Intel‑based Macs.

Get Pro64 Network Manager and firmware update files from the Aviom website, http://www.aviom.com.

Содержание 6416YZ





























































































Результаты поиска

Содержание 6416YZ

Отзывы:

Похожие инструкции для 6416YZ

Бренды по названию

Популярные бренды

Aviom 6416YZ, Руководство пользователя

Результаты поиска

Содержание 6416YZ

Отзывы:

Похожие инструкции для 6416YZ

Бренды по названию

Популярные бренды