Avery Weigh-Tronix ZM201 Скачать руководство пользователя страница 23

Страница: 23 / 66

ZM201 Indicator User Instructions

3.4 Checkweighing application

3.4.4 Weighing a target object

With the indicator in checkweighing mode, follow these steps to set a target by
weighing an object.

Press

ZERO

to zero the scale, if necessary.

Enter a tare if necessary. Refer to

Net weighing on page 17

for instructions.

Place an object of the desired weight on the scale and press

…

The weight is displayed and the middle bargraph segment lights as well
as the

SP2

annunciator.

Remove the object and replace with the next object to be checked.

The bargraph will show if the weight is under, over or within the target
weight range. If the weight is under,

SP1

annunciator and the

UNDER

bar segments will light. If the weight is over,

SP3

annunciator and the

OVER

bar segments will light.

Repeat step

until you are finished weighing items.

The current target weight will be active until you repeat steps

through

with a new

item of a different weight.

3.4.5 Setting upper and lower limits

With the indicator in checkweighing mode, follow these steps to set a target by setting
upper and lower limits.

Press

ZERO

to zero the scale, if necessary.

Enter a tare if necessary. Refer to

Net weighing on page 17

for instructions.

With weight inside the gross zero band, press

…

will be displayed briefly and then the current value for the lower

accept weight.

Press

ZERO

to accept this or key in a new lower accept weight and press

ZERO

…

is briefly displayed and then the current value for the upper accept

weight.

Press

ZERO

to accept this or key in a new upper accept weight and press

ZERO

…

The display returns to normal weighing mode.

The acceptable target window is a range from

Target Object weight ± a predefined

range

entered in a password protected menu.

The farther the weight is from the target weight, more over or under bargraph
segments will light. The UNDER and OVER bargraph segments are fixed at 1 division
each.

Содержание ZM201



































































Результаты поиска

Содержание ZM201

Отзывы:

Похожие инструкции для ZM201

Бренды по названию

Популярные бренды

Avery Weigh-Tronix ZM201, Инструкция пользователя

Результаты поиска

Содержание ZM201

Отзывы:

Похожие инструкции для ZM201

Бренды по названию

Популярные бренды