Avery Weigh-Tronix WPI-135, Руководство по обслуживанию

Страница: 7 / 75

7
Soft Keys
Menu Structure
Soft keys are so-called because their function is not fixed. Function can
change as the mode of operation changes or as the program for your
particular setup changes.
Their are five soft keys (labeled F1-F5) located directly below the display. If
the keys are needed during any operation, a label for each active key
appears in the display directly above. There are only five key labels available
at one time but this does not limit the potential usefulness of these keys.
Programs can be created to enable one key to access another menu of
operation with more key names and functions.
There are several menus you use to setup or service the WPI-135. You
access the menus described below through the front panel. Each menu is
briefly described here. For in depth information about a menu, go to that
menu's section in this manual.
User menu (default password is 111)
The first menu covered in this manual is the User menu. The
items in this menu are the most commonly changed values and
parameters that you will use in the course of operating the WPI-
135.
Configuration menu (default password is 2045)
The second menu covered is the Configuration menu. These
items deal with some of the basic functions of the WPI-135 and
do not need to be accessed very often.
Calibration menu (default password is 30456)
The third menu is the Calibration menu. This section will need
to be accessed only when the scale is being calibrated or if you
change scale capacity or division size.
Diagnostic menu (default password is 911)
This menu is used to access several tests which can help
isolate problems.