Avery Weigh-Tronix WPI-135, Руководство по обслуживанию

Страница: 36 / 75

36
5. There is a display pc board and a display module attached to the backer
plate. If you need to remove the display board, disconnect the cables
and remove the three standoffs and two nuts shown in Figure 14
Figure 14
Display board
6. To remove the display module, disconnect the cables and remove the
four screws holding the module to the backer plate and pull it from the
case. See Figure 15.
Figure 15
Display module
Replace any of the boards if needed and reassemble the unit by reversing
the disassembly procedure.