Avery Weigh-Tronix WPI-135, Руководство по обслуживанию

Страница: 31 / 75

31
Calibrate
—INFO
—VERS
If you press the VERS soft key, you can see all the following information on
consecutive screens as you press any key to continue. The SimPoser
information will be available only if a file has been downloaded to the indica-
tor.
• Firmware version
• Part number and revision level
• Serial number of the indicator
• XILINX version
• XILINX part number
• XILINX revision level
• SimPoser license number and license holder of the person that saved
the file
• SimPoser license number and license holder of the person that down-
loaded the file
• Version of the SimPoser that created the file
• File name
• Time and date file was created
After viewing the last screen, the display returns to the INFO display.
If you press the VIEW soft key, you can view the following information about
calibration:
• Calibration date
• Calibration weight
• Displayed weight following calibration
If you press the FACTOR soft key, you can see the following:
• CAL ZERO in mV/V
• CAL FACTOR in mV/V
• CAL ZERO in counts
• CAL FACTOR in counts per divison
• CFG
• GAIN
• DAC
• AINRO
• AINNO
• URFNO
If you press the PRINT soft key you are given a choice of four ports through
which to print the calibration information. Pick port 1-4 and the information is
transmitted and the screen returns to the INFO display.
Press the EXIT softkey to return to normal weighing operation. You will be
prompted to save any changes made. Press NO to exit without saving
changes. Press YES to exit and save changes.
Calibrate
—INFO
—VIEW
Calibrate
—INFO
—FACTOR
Calibrate
—INFO
—PRINT
Calibrate
—EXIT
A/D converter settings