Avery Weigh-Tronix WPI-135, Руководство по обслуживанию

Страница: 59 / 75

Setpoint Operation
If setpoints 1 thru 4 are programmed in SimPoser as inputs, the physical location for these will always be on the
power supply TB31. The setpoint location for setpoints 1 thru 4 on the option card(s) will then be invalid, and do not
function.
If setpoints 1 thru 4 are programmed in SimPoser for outputs, the TB31 location on the power supply board will act
in parallel to the physical location of setpoints 1 thru 4 (set by switches on remote expanded control PCBs) on the
option card(s).
When only using OPTO modules ( 4 maximum) on the power supply board without any setpoint option cards, they
can be used as either inputs or outputs. We recommend low voltage OPTO modules on the power supply board.
Rated
W-T P/N Current Wickmann
46618 (amp) TR5-F P/N
-0015 .050 19373K-50A
-0023 .063 19373K-63A
-0031 .080 19373K-80A
-0049 .100 19373K-100A
-0056 .125 19373K-125A
-0064 .160 19373K-160A
-0072 .200 19373K-200A
-0080 .250 19373K-250A
-0098 .315 19373K-315A
-0106 .400 19373K-400A
-0114 .500 19373K-500A
Rated
W-T P/N Current Wickmann
46618 (amp) TR5-F P/N
-0122 .630 19373K-630A
-0130 .800 19373K-800A
-0148 1.0 19373K-1A
-0155 1.25 19373K-1,25A
-0163 1.6 19373K-1,6A
-0171 2.0 19373K-2A
-0189 2.5 19373K-2,5A
-0197 3.15 19373K-3,15A
-0205 4.0 19373K-4A
-0213 5.0 19373K-5A
-0221 6.3 19373K-6,3A
Opto-22 Output Module Fuse Table
59