Avery Weigh-Tronix WPI-135, Руководство по обслуживанию

Страница: 16 / 75

16
Configuration
—MENU 1
Configuration
—MENU1
—#SCL
Configuration
—MENU1
—UNITS
Press the MENU1 soft key to access the following soft key group:
#SCL Press this key to set number of active scales,
UNITS Use this key to enable/disable units of measure.
KEYS Use this key to enable or disable front panel keys
SERIAL Use this key to set port #, baud rate, parity, databits, hand-
shake, mode, and EOM character.
VALS Use this key to enable/disable values to be shown in the main
weight display
Following are detailed instructions for setting these parameters.
If you press the #SCL soft key, follow these instructions:
1. The display will show the number
of active scales. Accept this by
pressing the ENTER key or key
in the number of attached
scales and press the ENTER
key. . .
The display returns to the MENU1
display.
If you press the UNITS soft key, follow these instructions:
1. The display asks if you want to
enable the LB unit of measure
and shows you the current state
(
ON or OFF). If the condition is
as you want it, simply press the
ENTER key. If you want to
change the condition, press the
YES or NO soft key, then the
ENTER key to move to the next
unit of measure. . .
The kilogram unit of measure is the
next one shown.
2. Repeat step 1 for kilograms,
grams, ounces, pounds &
ounces, and custom units 1 - 4.
The display asks for calibration
units, then the number of custom
units that are equivalent.
Key in the values and press
ENTER. . .
The display returns to the MENU1
display.
Custom Units prompts for how
many calibration units equal
how many custom units.
Example: 2000 lb = 1 ton