- 50 -
Display Channel:
You can set whether the GPS information display on each channel.
“
“means the selected channel will display the GPS information including the latitude,
longitude, speed of the vehicle.(Please refer to section 4.2)
5.8.3
Server Login Setup
The topology of wireless vehicle monitoring system is shown as Fig.5.29.
Note: The DVR need to connect with a wireless router (with dial-up function), if the mobile
DVR want to login the server through wireless network.
Graphic Note: CMS——Central Manage Server
LB——Load Balancer
VTDU——Video Transfer and Distribute Unit
PU——Peripheral Unit
CU——Client Unit
The server login parameters have to be set before the device login the wireless network server.
The server login interface is shown in Fig.5.30:
At first, user need to choose one network environment, there are 4 options:
CDMA/EDGE/GPRS, 3G, WLAN, LAN.
Please input load balance (LB) IP address in “Server IP”, the port should be as same as the
client port of server, the default is 5660.
Login ID and Login PSW are the ID and password assigned by the server; you can get these
from the administrator.
The setup of the server login parameters will become effective after reboot. You also need
to input IP and gateway in “Network” interface, then you can login the wireless server.
Fig.5.30
Fig.5.29
User Manual of DMB-04R Embedded Mobile DVR (V1.0)
