- 49 -
the setup time.
Auto Work:
“√”means start the auto work function. Press[EDIT]to switch.
Date:
the auto work setup is set by day; you can copy the schedule to the other days.
Period 1, Period 2:
you can set two auto work periods for one day. The periods cannot overlap.
Copy to, Copy: the settled time can be copied to other days.
Note:
1. After auto halt of device, if user need to boot it again, please disconnect “KEY” and reconnect it before booting the device.
2. If booting the DVR beyond the auto on/off time, under the 3 conditions, the device will auto halt:
1) No operation in 1 min after power on.
2) No user login in 1 min.
3) No operation in 1 min after last operation.
5.8.2
GPS Setup
D
MB-04R
can access an external GPS mode (G-mouse).Please setup the parameters as
following; otherwise it will not receive GPS signals. The setup include: GPS interface, Time correct,
Overspeed warning, GPS information display.
GPS Interface:
Please set “GPS Interface” as “RS485” before connecting G-mouse with
D
MB-04R
. Also, you need to setup the bit rate in “PTZ” menu as the same as the
external GPS mode. (Please refer to section 5.6)
Time correct:
“
“means the GPS time correction is enable. You can choose the
corresponding time zone. (The default time zone is GMT+08:00, Range: GMT+12:00 to
GMT-12:00) When the GPS signals are received, the system will correct time every 5 mins.
Speed Unit, Max Speed:
“Speed Unit” and “Max Speed” is used to control the vehicle’s
speed by GPS information. You can set a maximum speed and setup warning handle method
in “Exceptions” menu. When the vehicle is overspeed, the DVR will trigger the alarm. (Please
refer to section 5.7) The speed unit has two options: KPH/MPH. The default max speed is
100KPH and 62MPH, this can be modified.
Fig.5.28
User Manual of DMB-04R Embedded Mobile DVR (V1.0)
