Avaya MultiVantage, Руководство по установке

Страница: 192 / 246

Music-on-hold
555-233-116
192
Issue 4 October 2002
Figure 45. Typical registered equipment connections (auxiliary access) for an MCC1,
SCC1, CMC1, or G600 Media Gateway
1. If the music source is registered, the system side of the MDF connects
directly to the system.
2. If the music source is not registered, the system side of the MDF connects
to a 909A/B universal coupler (see Chapter 1, ‘‘909A/B universal coupler’’ ).
Registered music source
Refer to Figure 45 to install a registered music source.
1. Determine feature port assignment from Feature-Related System
Parameters form.
2. Install music source according to the manufacturer’s instructions.
3. Install patch cord/jumper wires at the main distribution frame.
4. Administer the switch for the new equipment.
Nonregistered music source
Refer to Figure 46 and Figure 47 when installing a nonregistered music source.
1. Determine feature port assignment from Feature-Related System
Parameters Form.
2. Install the music source according to the manufacturer’s instructions.
1. Music source
2. 4-pair modular cord
3. 103A or modular wall jack
4. 122A music adapter (if required—primarily
required in France)
5. Tip (green) and ring (red)
6. Part of main distribution frame
7. A25D 25 pair cable (male-to-male) to
auxiliary trunk circuit pack
cydfmusc RPY 090397
1
2
3 4
5
6
7