Avaya MultiVantage, Руководство по установке

Страница: 174 / 246

Call detail recording (CDR) option settings
555-233-116
174
Issue 4 October 2002
On a G700/S8300 server configuration, CDR equipment can connect to one of the
two IP connections (
EXT 1
or
EXT 2
) on the front of the G700 Media Gateway.
NOTE:
You can also use any of the ports on an optional 16-port module, if your
G700 Media Gateway is so equipped.
Using other equipment as the CDR
output devices
A printer, a 94A local storage unit (LSU), or customer premises equipment (CPE)
can be used as the output receiving device.
Sources of administration information
Administration procedures for CDR equipment are provided in Administrator’s
Guide for Avaya MultiVantage Software.
Connecting a CDR device
This section provides information on connecting adjuncts to the media server, and
providing the initial administration.
Task list
Whether you use an end-to-end TCP/IP configuration, a terminal server or a PC
running RSP, you must complete the following tasks:
■
‘‘Administering IP node names’’ on page 131
■
‘‘Administering IP services’’ on page 132
■
‘‘Administering CDR parameters’’ on page 174
■
If you are using a terminal server, also complete ‘‘Installing and
administering the terminal server’’ on page 122
■
If you are using a PC with the Downloadable RSP Tool, complete ‘‘Using
the downloadable reliable session-layer protocol (RSP) tool’’ on page 176
Administering CDR parameters
You must administer adjunct parameters to let the system know that the adjunct is
connected through TCP/IP.
1. Type change system-parameters cdr and press
RETURN
.