Avaya MultiVantage, Руководство по установке

Страница: 181 / 246

DEFINITY INADS
Issue 4 October 2002
181
555-233-116
Administration
NOTE:
Add 2 pauses in front of the dial string when using cut-through trunks.
Pauses are not required if using ARS.
1. Type change system-parameters maintenance and press
Enter
.
2. For high reliability systems, in the
see interchange:
field, type daily
and press
Enter
. This is done in case 1 of the connections between the 2
TN1648B circuit packs is down. This assures that within 24 hours the
working connection is available to report alarms.
3. Type add station number or next and press
Enter
.
4. In the
Type
field, enter 500 (rotary analog telephone).
5. In the
Port
field, enter the port number for this line.
6. For high reliability systems, repeat the above steps for the second analog
line. Administer the 2 stations as part of a TEG (terminating extension
group).
a. Type add term-ext-group number or next and press
Enter
.
b. In the
Group Extension
field, enter the TEG extension number.
c. In the
Coverage Path
field, enter the coverage path number.
d. Enter the Group Member Assignment station numbers.
e. Press
Enter
when finished.
Partner installation
The PARTNER system connects the INADS port to an outgoing central office
(CO) line and is programmed to seize the outside line when INADS seizes an
inside PARTNER station line.
There are 2 types of PARTNER platforms:
■
PARTNER Atlas platforms with U.S. firmware and a wide input power
supply (WIPS) that allows a universal power supply. The Spain platform
conforms to the United States/Atlas platform
■
European platforms that focus on eastern Europe and the United Kingdom
The installation procedure describes the 2 types of PARTNER platforms with or
without power fail transfer.