manualshive.com logo in svg

Avaya Media Processing Server 500, Установка и обслуживание оборудования, Страница: 50 / 220

Поделиться
Скачать
Avaya Media Processing Server 500 Скачать руководство пользователя страница 50

2. If you have a desktop drive, remove the screws on the back of the case and slide the chassis

out. If you have a rack mount drive, remove the drive from its rack mounted enclosure.

3. For both the desktop and rack mount models, turn the chassis over and change the DIP

switch settings located on the bottom of the chassis. Use the following settings and refer to
the following diagram.

• 5-ON

• 6-OFF

• 7-ON

• 8-ON

Figure 25: Bottom of Seagate DAT Drive Chassis

Do not modify any other DIP switch settings.

Do not reassemble the drive until you complete the next section, 

Seagate Drives SCSI ID

Settings

 on page 50.

Seagate Drives SCSI ID Settings

1. If you have a desktop drive, change the SCSI ID thumb wheel switch to ID 4. If you have a

rack mount drive, change the SCSI ID jumper settings to ID 4.

Installing Hardware and Configuring Connectivity

50

     Avaya Media Processing Server 500 Hardware Installation and Maintenance

October 2014

Comments? [email protected]

Содержание Media Processing Server 500





























































































































































































































Отзывы:

Нет отзывов