manualshive.com logo in svg

Avaya Media Processing Server 500, Установка и обслуживание оборудования, Страница: 154 / 220

Поделиться
Скачать
Avaya Media Processing Server 500 Скачать руководство пользователя страница 154

Chapter 7: Maintenance

This chapter covers:

1. Maintaining the SPARC-Based Server
2. System Backup and Recovery
3. Field Replaceable Units

Managing the SPARC-Based Server

This section describes how to use SPARC-based server management tools.

SPARC-Based Processor

Lights Out Management (LOM)

You can manage the SPARC-based server through the Serial Port A/LOM serial connection.

• Use a cable connection to a Windows based server running HyperTerm.
• The console must be configured to run at 9600 baud, 8 bit no parity. (See the

Sun documentation for your server for console configuration.)

• The cable supplied with each system (with Sun #530-2889-03 adapter)

terminates with a DB-25 male and requires the use of a DB-25 to DB-9 male

adapter.

154

     Avaya Media Processing Server 500 Hardware Installation and Maintenance

October 2014

Comments? [email protected]

Содержание Media Processing Server 500





























































































































































































































Отзывы:

Нет отзывов