manualshive.com logo in svg

Avaya Media Processing Server 500, Установка и обслуживание оборудования, Страница: 102 / 220

Поделиться
Скачать
Avaya Media Processing Server 500 Скачать руководство пользователя страница 102

e. DNS server setup is site-specific, get the settings from your local network administrator.

3. Verify Fault Switch Tolerance.

a. Run the 

ping

 command from the Command Prompt window of another PC.

a. Solaris based system:

ping -s 10.7.0.1

b. Windows based system:

ping -t 10.7.0.1

b. View the results of the ping command by scrolling down the screen. Test the Ethernet

connection by disconnecting and reconnecting the Ethernet cables one at a time. The

Fault Switch Tolerance is working correctly if no interruption occurs in the ping results.

Configuring IPMP for Solaris Based Processors

Sun Netra

Use the following procedure to configure IPMP with one active and one standby interface.

1. Ensure that both Ethernet network interfaces have a unique MAC address.

2. Team together Ethernet network interfaces of the same type.

3. All interfaces of the multipathing group must be connected to the same IP subnet.

For example, bge0, bge1 for node name MPSAP1-a.

Configuration (Part II)

102

     Avaya Media Processing Server 500 Hardware Installation and Maintenance

October 2014

Comments? [email protected]

Содержание Media Processing Server 500





























































































































































































































Отзывы:

Нет отзывов