manualshive.com logo in svg

Avaya Media Processing Server 500, Установка и обслуживание оборудования, Страница: 171 / 220

Поделиться
Скачать
Avaya Media Processing Server 500 Скачать руководство пользователя страница 171

A list of disk drives are presented.

• 72

• 146

• 300

4. Select the disk size.

Note:

The numbers listed above are the actual (raw/unformatted) disk drive size so the
numbers displayed on the screen will be little bit different (formatted).

A list of wim images is presented, with the default being the last one found. Select the one
that matches the server type.

If server type is

Select Image

HP G5

2008_g8765_rc8

HP G7
HP Gen8
HP G7 2003

2003_g7_rc4

IBM X3550 Clovertown
3.5" HDD

2008_x3550hcw_rc7

IBM x3550 Harpertown
2.5" HDD
IBM x3550 Woodcrest
3.5" HDD
IBM x3550 M3

2008_x3550m34_rc5

IBM x3550 M4

The script applies the image selected above and the Windows operating system will be
installed.

The System reboots.

5. Perform on of the following steps:

• For 2008, go to 

Performing the post rollout steps

 on page 171

• For 2003, go to 

Performing post rollout steps for Windows 2003

 on page 174

Performing the post rollout steps

Procedure

1. Reboot to new system, setup runs and reboots.

Performing a DVD rollout (WIM)

October 2014

Avaya Media Processing Server 500 Hardware Installation and Maintenance     

171

Comments? [email protected]

Содержание Media Processing Server 500





























































































































































































































Отзывы:

Нет отзывов