manualshive.com logo in svg

Avaya Media Processing Server 500, Установка и обслуживание оборудования, Страница: 162 / 220

Поделиться
Скачать
Avaya Media Processing Server 500 Скачать руководство пользователя страница 162

Both the SOURCE and TARGET HDDs must be displayed.

Label      Disk name               Vendor   Product          Vers 

    ---------- ----------------------  -------- ---------------- ----

    /SYS/HDD0  c0t5000CCA0221AA2A8d0   HITACHI  H109030SESUN300G A31A

    /SYS/HDD1  c0t5000CCA03C5CC674d0   HITACHI  

If not, the new disk may need to be labeled via the Format Menu.

#format

• Select correct HDD.

• label - write label to the disk.

• Table name - “New”.

• See the format command for more details.

2. Continue only when both HDDs are available to the diskinfo command.

3. Execute: 

/etc/WWNcopyHDD

.

Use only 16-hexadecimal-digits.

Disk to Disk Copy completes in approximately 45 minutes.

Maintenance

162

     Avaya Media Processing Server 500 Hardware Installation and Maintenance

October 2014

Comments? [email protected]

Содержание Media Processing Server 500





























































































































































































































Отзывы:

Нет отзывов