manualshive.com logo in svg

Avaya Media Processing Server 500, Установка и обслуживание оборудования, Страница: 215 / 220

Поделиться
Скачать
Avaya Media Processing Server 500 Скачать руководство пользователя страница 215

Replacing the MPS 100/500 Top Cover

Caution:

Follow all appropriate ESD procedures when working inside the MPS 100 cabinet.

1. Remove all screws (A, B, and C) as shown in the following diagram.

2. Disconnect all cables from the front of the enclosure (ribbon cable, and so on).

3. Slide the TMS out of the enclosure.

4. Slide the cover forward far enough to remove the ribbon cable from the back of the

enclosure.

5. Lift the cover up and away from the enclosure.

6. Inspect and remove any loose debris from inside the enclosure.

7. Install the new cover, reconnect the cables, and install the screws.

Replacing the MPS 100/500 Top Cover

October 2014

Avaya Media Processing Server 500 Hardware Installation and Maintenance     

215

Comments? [email protected]

Содержание Media Processing Server 500





























































































































































































































Отзывы:

Нет отзывов