manualshive.com logo in svg

Avaya Media Processing Server 500, Установка и обслуживание оборудования, Страница: 186 / 220

Поделиться
Скачать
Avaya Media Processing Server 500 Скачать руководство пользователя страница 186

Installing a TMS

1. Install the modules on the TMS in the same slots from which they were removed. Install

modules in slots 2 and 4 first:

a. Carefully mate the connector of the module board with the connector on the TMS riser

board.

b. Install two screws to secure the module mounting plate to the TMS front panel.

2. Slide the TMS into the chassis on slot guides and seat the backplane connectors by pushing

in on the two card extractors.

3. Secure the TMS to the chassis with two screws.

4. Connect the telephone line input cable to the RJ48M connector on the front of the DCC.

Maintenance

186

     Avaya Media Processing Server 500 Hardware Installation and Maintenance

October 2014

Comments? [email protected]

Содержание Media Processing Server 500





























































































































































































































Отзывы:

Нет отзывов