Avaya J159 страница 4 Скачать руководство пользователя

Страница: 4 / 149

This device complies with Industry Canada licence-exempt RSS

standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including

interference that may cause undesired operation of the

device.

Le présent appareil est conforme aux CNR d'Industrie Canada

applicables aux appareils radio exempts de licence. L'exploitation est

autorisée aux deux conditions suivantes:

1. L'appareil ne doit pas produire de brouillage, et

2. L'utilisateur de l'appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est susceptible

d'en compromettre le fonctionnement.

Radio Transmitter Statement

Under Industry Canada regulations, this radio transmitter may only

operate using an antenna of a type and maximum (or lesser) gain

approved for the transmitter by Industry Canada. To reduce potential

radio interference to other users, the antenna type and its gain

should be so chosen that the equivalent isotropically radiated power

(EIRP) is not more than that necessary for successful

communication.

Conformément à la réglementation d'Industrie Canada, le présent

émetteur radio peut fonctionner avec une antenne d'un type et d'un

gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie

Canada. Dans le but de réduire les risques de brouillage

radioélectrique à l'intention des autres utilisateurs, il faut choisir le

type d'antenne et son gain de sorte que la puissance isotrope

rayonnée équivalente ne dépasse pas l'intensité nécessaire à

l'établissement d'une communication satisfaisante.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme

NMB-003 du Canada.

Radiation Exposure Statement

This equipment complies with FCC & IC RSS102 radiation exposure

limits set forth for an uncontrolled environment. This equipment

should be installed and operated with minimum distance 20cm

between the radiator & your body. This transmitter must not be co-

located or operating in conjunction with any other antenna or

transmitter.

Cet équipement est conforme aux limites d'exposition aux

rayonnements ISEDétablies pour un environnement non contrôlé.

Cet équipement doit être installé et utilisé avec un minimum de 20

cm de distance entre la source de rayonnement et votre corps.

This product meets the applicable Innovation, Science and Economic

Development Canada technical specifications.

Japan Statements

Class B Statement

This is a Class B product based on the standard of the VCCI Council.

If this is used near a radio or television receiver in a domestic

environment, it may cause radio interference. Install and use the

equipment according to the instruction manual.

Denan Power Cord Statement

Danger:

Please be careful of the following while installing the

equipment:

• Please only use the connecting cables, power cord, and

AC adapters shipped with the equipment or specified by

Avaya to be used with the equipment. If you use any

other equipment, it may cause failures, malfunctioning,

or fire.

• Power cords shipped with this equipment must not be

used with any other equipment. In case the above

guidelines are not followed, it may lead to death or

severe injury.

本製品を安全にご使用頂くため、以下のことにご注意ください。

•

接続ケーブル、電源コード、

アダプタなどの部品は、必ず

製品に同梱されております添付品または指定品をご使用くだ
さい。添付品指定品以外の部品をご使用になると故障や動作
不良、火災の原因となることがあります。

•

同梱されております付属の電源コードを他の機器には使用し
ないでください。上記注意事項を守らないと、死亡や大怪我
など人身事故の原因となることがあります。

México Statement

The operation of this equipment is subject to the following two

conditions:

1. It is possible that this equipment or device may not cause

harmful interference, and

2. This equipment or device must accept any interference,

including interference that may cause undesired operation.

La operación de este equipo está sujeta a las siguientes dos

condiciones:

1. Es posible que este equipo o dispositivo no cause

interferencia perjudicial y

2. Este equipo o dispositivo debe aceptar cualquier

interferencia, incluyendo la que pueda causar su operación

no deseada.

Brazil Statement

Este equipamento não tem direito à proteção contra interferência

prejudicial e não pode causar interferência em sistemas devidamente

autorizados

Power over Ethernet (PoE) Statement

This equipment must be connected to PoE networks without routing

to the outside plant.

U.S. Federal Communications Commission (FCC) Statements

Compliance Statement

The changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate

the equipment.

To comply with the FCC RF exposure compliance requirements, this

device and its antenna must not be co-located or operating to

conjunction with any other antenna or transmitter.

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received,

including interferences that may cause undesired

operation.

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designated to provide reasonable protection against

harmful interferences in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interferences to radio or

television reception, which can be determined by turning the

Содержание J159






















































































































































Результаты поиска

Содержание J159

Отзывы:

Похожие инструкции для J159

Бренды по названию

Популярные бренды

Avaya J159, Руководство пользователя

Результаты поиска

Содержание J159

Отзывы:

Похожие инструкции для J159

Бренды по названию

Популярные бренды