Avaya J159 страница 60 Скачать руководство пользователя

Страница: 60 / 149

BroadWorks Mobility

With the BroadWorks Mobility feature, you can use your personal mobile device in conjunction

with your desk IP phone. You can make calls from your personal mobile using a BroadWorks

business number as the calling ID.

Limitations

The following are the limitations of the BroadWorks Mobility feature:

• Only an administrator can enable or disable the Mobility feature.
• Only an administrator can add the mobile numbers for the Mobility feature.

Note:

To activate the feature, contact your system administrator or go to the BroadSoft web interface

to activate the feature. See

https://www.broadsoft.com/

for more information.

Enabling and disabling BroadWorks Mobility alerting

Procedure

1. Press

Main menu

2. Scroll to

Features

, and press

Select

3. Scroll to

BroadWorks Mobility

, and press one of the following:

•

Enable

: To enable the feature.

The green LED light turns on, indicating that some or all configured mobile alerting are
enabled.

•

Disable

: To disable the feature.

The red LED light turns on, indicating that all configured mobile alerting are disabled.

Note:

If the LED does not light, contact your administrator.

Configuring BroadWorks Mobility

About this task

Use this procedure to configure the mobile device you want to use in conjunction with your office

phone.

Before you begin

Ensure your administrator has enabled the BroadWorks Mobility feature for your extension.

Advanced features

April 2020

Using Avaya J159 IP Phone in an Open SIP environment

Comments on this document? [email protected]

Содержание J159






















































































































































Результаты поиска

Содержание J159

Отзывы:

Похожие инструкции для J159

Бренды по названию

Популярные бренды

Avaya J159, Руководство пользователя

Результаты поиска

Содержание J159

Отзывы:

Похожие инструкции для J159

Бренды по названию

Популярные бренды