background image

Procedure

1. During an active call, navigate to the required extension by using the navigation cluster

and, press 

Conference

 button.

The phone puts the existing call on hold and initiates conference to the third participant.

2. When the third participant answers the call, press the 

Join

 soft key or press 

Conference

button.

3. To add another person, press 

Add

 and repeat Steps 2 and 3.

Adding a person on hold to a conference call

About this task

You can add a held call to a conference call.

Procedure

1. On the Phone screen, select your active call.

2. Press 

Conf

 or 

Add

 or 

Conference

 button if you are already in a conference.

3. Press 

Held call

 soft key to see a list of held calls.

4. Select the call on hold that you want to add to the conference.

5. Press one of the following:

Join

Conf

Conference

 button

The held call is added to the conference call.

Adding a person on hold to a conference call by using
conference button

About this task

You can add a held call to a conference call by using conference button. The conference button on

the phone provides you quick access to use the conference feature.

Procedure

During an active call, navigate to an existing held call and, press 

Conference

 button.

The held call is connected to the conference call.

Adding a person on hold to a conference call

April 2020

Using Avaya J159 IP Phone in an Open SIP environment

49

Comments on this document? [email protected]

Содержание J159






















































































































































Отзывы: