Avaya CallPilot 600r, Техническое обслуживание и диагностика, Страница: 26 / 106

Error message Description
Update OK! The NVRAM is invalid and has been
updated.
Updated Failed The NVRAM is invalid and the system cannot
update NVRAM.
Keyboard Error There is an error in the keyboard connection.
Make sure the keyboard is connected
properly.
KB/Interface Error The keyboard interface test failed.
Memory Size Decreased The memory size has decreased since the
last boot. If you did not remove any memory,
the memory can be faulty.
Memory Size Increased The memory size has increased since the
last boot. If you have not added any memory,
there is a problem with the system.
Memory Size Changed The memory size has changed since the last
boot. If you did not add or remove any
memory, the memory can be faulty.
No Boot Device Available The system did not find a device to boot from.
Off-Board Parity Error A parity error occurred on an off-board card.
This error is followed by the card address.
On-Board Parity Error A parity error occurred in the on-board
memory. This error is followed by the card
address.
Parity Error A parity error occurred in the on-board
memory at an unknown address.
NVRAM / CMOS / PASSWORD cleared by
Jumper NVRAM, CMOS, and passwords are
cleared. Power the system down and remove
the jumper.
<CTRL_N> Pressed The CMOS is ignored and NVRAM is
cleared. You must enter Setup.
Replacement parts
Before replacing any parts on your server, refer to the Avaya product catalog for the part codes.
Caution:
Risk of system damage
Troubleshooting your Avaya CallPilot® system
26 Avaya CallPilot® 600r Server Maintenance and Diagnostics December 2010