5
Bypass (Shunt) a zone
Allows manual removal of one or more protected zones from the system.
Day and Tamper Zone
A zone programmed as a Day or Tamper Zone enables alarm from keypad's buzzer
during daytime, when system is usually disarmed. The Day or Tamper zone will trigger
the keypad buzzer and the zone number will flash on keypad display. To reset Day Zone
alarm, hold-down key 9 (reset key).
During Armed mode, this zone will act as burglary zone and will emit an alarm when
troubled.
Dialer and Communicator
Alarm reports directly to predetermined stations via telephone lines. The dialer reports
an alarm to your telephone, a siren or a recorded message. To report a message, a SVM-
40 unit is required.
Digital Display
Keypad display. Provides alphanumerical readout of zone status and messages.
Entry Delay
The Entry Delay is the period allowed for someone to enter the premises and disarm the
system.
Entry-Exit Zone
The entry-exit door or zones are designated by your installer to be used for entering and
leaving the premises when the system is armed.
Exit Delay
The Exit Delay is the period allowed for users to leave the premises after arming the
system.
Fire Zone
A zone programmed for connection of fire or smoke detector. Alarm heard in both
Armed and Disarmed modes, and Fire LED is activated.
The siren sound is different from the 24H zone or burglary alarm (it depends on the
siren type used). To reset Fire alarm, hold-down ‘9’ key and your code.
‘Follow-Me’ Programmable Telephone Number
Dialer feature. The desired Follow Me Telephone number is programmed by the user
prior to arming – as necessary (to follow the user destination).