AV-GAD EasyLoader AV-701 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 23

AV-GAD EasyLoader AV-701 Скачать руководство пользователя страница 23

23

AV-GAD

LIMITED WARRANTY

A

v-Gad Systems Ltd. (Av-Gad) warrants it’s products to be free from

production defects in components, materials used and labor, for the period of twelve
months following the date of production. Av-Gad will within the mentioned period, as
its option, repair or replace any product failing to proper operation without charge the
purchaser.

This warranty shall not apply to any equipment, or any part thereof, which

has been repaired by others, installed not properly, used improperly, abused,
altered damaged, subjected to acts of God or on which the serial and data code
altered or removed.

Av-Gad will not be responsible for any dismantling or reinstallation expenses. In
order to exercise the warranty, the product must be returned by the purchaser,
delivery and transportation costs prepaid and insured to Av-Gad.

After repair or replacement, Av-Gad assumes the cost of returning products under
warranty.

There are no warranties, express or implied, which extend beyond the description
of the face hereof.

There is no express or implied warranty of merchantability or a warranty of fitness
for particular purpose. Additionally, this warranty is in lieu of all other obligations
or liabilities on the part of Av-Gad.

Any action for breach of warranty, including but not limited to any implied
warranty of merchantability, must be brought within three months following the
end of the warranty period. In no case shall Av-Gad be liable to anyone for any
consequential or incidental damages for breach of this or any other warranty,
express or implied, even if the loss or damage is caused by the seller’s own
negligence or fault.

Av-Gad is not an insurer of either the property or safety of the user’s employees,
family, or 3rd part and limits its liability for any loss or damage including
incidental or consequential damages to Av-Gad original selling price of the

product regardless of the cause of such loss or damage.

Av-Gad recommends testing the entire system weekly. Refer to Testing Your
System section for further details.

«
...
21
22
23

Содержание EasyLoader AV-701
























Отзывы:

Нет отзывов