16
The AV-707 keys and Hold-Down functions are identical to the AV-701 functions,
you can speed up the function by pressing ‘#’ key – the ENTER key.
The sounder and LEDs functions and indications are the same as described for the
AV-701.
The
#
is mostly used as an ENTER key, typed at the end of a command
LCD display
The LCD display helps understanding the system status and zone locations by reading
in plain text the system messages, zone description, time and other indications.
The first row displays system announcements, like: System Disarmed, Alarm, Low
Battery, etc., second row displays the zones
status.
Each ‘
’ sign represents a zone. If a zone is
open, the zone’s number like 123
567
will
replace the
.
If a zone is bypassed a '*' appears instead. The
control panel time is displayed in the five
rightmost positions.
The LCD displays often the installer LOGO (the
logo is editable). For displaying zone description
hold-down ‘3’ key twice.
To save power, the LCD and keys backlight turns
OFF after 60 seconds of no typing activity (it
turns ON again when an alarm occurs).
Most of the accessible functions with the LCD Keypad are similar to those of the
AV-701 (seven segments keypad).
Key Entries
Keys typed at the keypad are concealed (as they are part of the User Code). '* * * *'
are displayed.
In Armed and Disarmed mode, after six attempts to enter fault code, the keys will not
respond for 30 seconds, in order to prevent code break exigency.
During all kinds of programming, keys are displayed as they are typed (some
combinations are exceptional).
Setting New Code for the AV-707
To enter User Programming mode ‘Hold Down’ the '8' (program) key.
armed status
shunt
fire
A V-7 0 7
*
3
Open Zone
Close Zone
Bypassed Zone
1 2 : 0 0
Time
System Message