12
Years 1978 through 99 as 78 to 99
Years 2000 through 2077 00 to 77
The local date is stored in system memory; adjust date after long power-failure.
LED Indicators
Four LEDs provide visual indication of System status, as well as confirmation of
various modes.
!
Red ARMED/ALARM Indicator
- Lights up when system is armed, and blinks
after an alarm is triggered at any zone. Blinking indicates alarm history in memory.
!
Green STATUS Indicator
- Blinks when zone/s is/are troubled, remains lit as
long as zones are not troubled, rapid blinking indicates Tamper alarm.
!
Yellow SHUNT (Bypass) Indicator
- Lights up upon zone bypass.
(Note: May light automatically upon arming if Auto Bypass was programmed).
The indicator also lights and blinks upon Group Bypass entry (by pressing ‘0’ twice).
!
Red FIRE (Trouble) Indicator
- Rapid blinking when a Fire Zone is troubled.
!!
Two LEDs Flashing (Left Most LEDs)
- In user code programming mode,
rapid blinking indicates code or code index to be entered.
In Disarmed mode, the two left-most LEDs are blinking to indicate 24H-alarm mode.
Zone number will also be displayed.
!!!
Three LEDs Flashing
- In Disarmed mode, rapid blinking indicates AC
power failure. AC power failure event is displayed in Events History as three lines
≡
.
In Armed mode, rapid blinking indicates system restored after AC Power Failure
mode.
During programming the Follow-Me Telephone Number, three flashing LEDs
indicate that system is expecting a new telephone number.
!!!!
Four LEDs Flashing
- Upon holding-down key ‘8,’ the system is ready for
code to be entered.
System with bypass via code: Same LED indication when code is expected for Bypass
via code.)
Keypad display
The 7-segment display provides visual readout of system status. The display indicates
zones in alarm, troubled zones, bypassed zones and also displays the following
confirmation letters: