21
Troubleshooting
PROBLEM INDICATION
REMEDY
System fails to Arm
when code is entered
at Keypad
Keypad entries are
confirmed by beeps,
but system does not
react
1. Hold down ‘9’ key until you hear a beep,
then enter arming code
2. Program new arming code
3. If you forgot your Arming code, call your
installer
System cannot be
disarmed
Arming/Disarming
code is entered but
Red indicator
remains lit
1. Hold down ‘9’ key until you hear the
confirmation beep. Enter arming code
carefully.
Do not be confused by Siren
noise.
2. System was armed using the Instant
Arming key (key 5), but code was changed.
(You can ask your installer to cancel this
feature.)
Yellow indicator is
on (indication that
zones have been
bypassed)
Yellow (shunt)
indicator constantly
on
Arm and disarm the system; the indicator
light should turn off
Green indicator
blinks continuously
when you attempt to
arm the system
≡
Sign is displayed,
and arming denied
(system can not be
Armed with an open
instant or 24H zone)
Hold down ‘3’ key; the zone/s in trouble
will be displayed. Check the cause: an open
window; movement detected by detector or
else.
1. Press ‘0’ key (Bypass), and then the zone
number where alarm was triggered.
The yellow indicator should light in
confirmation.
2. A delayed zone may be troubled. An open
delayed zone will cause the green indicator
to blink upon exit/entry
Three LEDs
indicators are
blinking, indicating
Power Failure
The system is not
responding; keys do
not respond
You may have a general power failure.
Check your premises fuse box
WARNING!
If Green indicator is still OFF,
your system is operating on temporary
power supplied by the Battery