Autronica AutroVoice miniVES 2001, Руководство по обслуживанию

Страница: 128 / 156

128
COMPACT VOICE ALARM SYSTEM
SERVICE MANUAL
Signalization priority
PRIORYTET
(0 – highest)
Block zone 0
Zone failure
Ű closing / shorting / opening
Ű no EOL
Ű impedance error
Ű switching into LOOP
……
1
Zone failure confirmed 1
EVACUATION MESSAGE playback 2
WARNING MESSAGE playback 2
Spoken message from fireman microphone 2
Spoken message from zone or BGM microphone 2
Volume change 3
Audio Monitor 4
12.13 FAQ
1. No visible AutroVoice miniVES server in the System Connection window
In order to either upload a configuration onto a system, go into the on-line mode or download system reports, the configurator
must be connected to a server visible in the system connection window. The first thing one must do in this situation, is to make
sure that the IP configuration of the computer running the software is not set to a static IP adress. To do so, check the Local area
connection properties in the Internet protocol version 4 (TCP/IPv4) tab, the „obtain an IP adress automatically” option should be
checked. The next step should be deactivating the Windows internal firewall. Go to the Control Panel –> System and Security
–> Windows Firewall –> Turn Windows Firewall on or off apply this to both the private and public network. If the server is still
not visible in the connection window, please check the computer for running antivirus software such as Eset, Avast, AVG, if the
computer is running this software, disable it for the time of system configuration. It is recommended to add the AutroVoice miniVES
connection to a list of safe connections in the OS.
2. Configuration of a running AutroVoice miniVES system impossible to download
In order to correctly download the configuration, follow these steps:
1. Start the configurator
2. Select Create a new configuration – IMPORTANT!
3. Connect to the system by clicking System –> Connection Settings and the Connect button
4. Then in the same window choose the Download current configuration option