Autronica AutroVoice miniVES 2001, Руководство по обслуживанию

Страница: 133 / 156

133
“I0104” – “Event deactivation %x”
“I0105” – “Matrix activation %x”
“I0106” – “Matrix deactivation %x”
“I0107” – “Failure Accept”
“I0108” – “Failure Delete”
“I0109” – “Device start, dev=%x”
“I0110” – “Connection state 0x%x->0x%x: %d”
“I0111” – “Logical input 0x%x state changed %d”
“I0112” – “Logical output (Relay) 0x%x state changed to the value %d”
“I0119” – “Backup link activation”
3. The size of memory card in the control unit compared to available length of the message played,
recorded and the number of entries in reports
SD Card [MB] 512 1024 2048 4096 8192 16348 32768
System / CFG ** 104 144 224 384 704 1344 2624
Audio Message
16 bit / 48 kS/s
110
(20 min)
220
(40 min)
440
(80 min)
880
(160 min)
1760
(320 min)
3520
(640 min)
7040
(1280 min)
Reports
6,5
(100 k)
13
(200 k)
26
(400 k)
52
(800 k)
104
(1600 k)
208
(3200 k)
416
(64000 k)
BlackBox
165
(60 min)
330
(120 min)
660
(240 min)
1320
(480 min)
2640
(960 min)
5280
(1920 min)
10560
(3840 min)
RecordMessage
75
(20 min)
150
(40 min)
300
(80 min)
600
(160 min)
1200
(320 min)
2400
(640 min)
4800
(1280 min)
Service / Debug / Logs 32 32 32 32 32 32 32
4. Simplified installation scheme of adding the system to the server
4.1. In order to enable remote access, the system must be configured locally. To do this, upload the proper configuration in
which the connection path to remote server is described. This can be either a simplified or a full system configuration.
4.2. Server sharing configuration
You should enter the folder where Selector application is installed, then open the file .remote_server ( preferably with a note-
pad), and add the IP address (or preferred domain) of the server to which you want to connect the Selector. Then save and close.
.remote_server – is a file with information to the system how it should connect while using remote connection.
Current IP: 46.41.133.88
Domain: vps-1124638-8824.cp.homecloud.pl