AutoXray EZ-READ, Руководство пользователя

Страница: 23 / 64

Page 23
Before You Start
• Clearing Trouble Codes will remove any Trouble Codes
from the vehicle’s computer. You can use this feature to
make sure vehicle repairs were done correctly by doing a
new scan after clearing the codes.
• Your vehicle must be scanned before clearing trouble
codes. If
DATA
is pressed, and the vehicle has not been
scanned, the scanner will display
Press the Scan
key to Scan New Data
. Refer to “Key ON, Engine
OFF (KOEO) Scan” on page 17, “Key ON, Engine Running
(KOER) Scan” on page 18.
Clearing Trouble Codes
1. Make sure the EZ-Read scanner cable is correctly connected to
the scanner and to the vehicle. Turn the vehicle ignition key OFF
for at least 10 seconds, turn the key ON,
then press
POWER
.
2. Press
DATA
to display the Data menu.
Use the
p
and
q
arrow keys until
4-Clear Codes
is highlighted,
then press
ENTER
.
3.
ENTER to Clear
will be displayed
on the screen. Press
ENTER
to clear
all the codes in the vehicle’s computer.
(Pressing
DATA
again will take the
unit out of Data mode and display the
opening screen.)
4. After the codes have been cleared,
Function Successful
will be
displayed. Press DATA to display the
opening screen.
C
LEAR
T
ROUBLE
C
ODES
- F
ORD