AutoXray EZ-READ, Руководство пользователя

Страница: 52 / 64

5. Make sure the year and VIN are correctly entered.
6. Try wiggling the connector during the attempted scan.
7. Ensure the correct cable is being used.
Screen Contrast Problems
Some users have experienced problems concerning screen
contrast with newer batteries like the Duracell Ultra. These
batteries produce a higher than normal voltage and can affect
the Code Reader screen contrast, making the screen difficult to
read. We apologize for the inconvenience. If you encounter this
problem, run your Code Reader for approximately 2 hours to run
off the high voltage causing the problem. (It will be necessary to
press a key occasionally to override the EZ-Read Code Reader
power miser function.)
NOTE:
After these batteries reach their rated voltage (1.5V) the
battery life should still be approximately 500 hours.
How to Reset the Code Reader
1. Power Code Reader on.
2. Open the battery compartment and remove one battery.
3. Hold down
POWER
for 5 seconds.
4. Put the battery back in, and power on.
NOTE:
These steps will re-set the Code Reader. If your problem
persists please contact AutoXray technical support.
Page 52
T
ROUBLESHOOTING
(C
ONT
.)