AutoXray EZ-READ, Руководство пользователя

Страница: 14 / 64

Page 14
Before You Start
•
[OBD-II] Your scanner must be connected, and the key in the ON
position, before viewing OBD-II Readiness Test data. If
MON
is
pressed, and the vehicle has not been scanned, the scanner will
display
Press the Scan key to Scan New Data
. Refer to
“Scanning the Vehicle” on page 12.
1. Press
POWER
to display the EZ-Read scanner opening
screen.
2. Press
MON
to display Monitor menu.
Use the
p
and
q
arrow keys until
3-
Readiness Test
is highlighted, then
press
ENTER
.
3. The name of the Readiness Test will be
displayed, followed by its status. Status is
either Completed, Not Completed, or Not
Supported.
• A down arrow on the screen indicates other test results.
Use the
p
and
q
arrow keys to view these other test
results.
The following Readiness Tests are supported by the scanner:
C
ONTINUOUS
N
ON
-C
ONTINUOUS
Misfire Monitoring Catalyst Monitoring
Fuel System Monitoring Heated Catalyst Monitoring
Comprehensive Evaporative System Monitoring
Component Monitoring Secondary Air System Monitoring
A/C System Refrigerant Monitoring
O2 Sensor Monitoring
O2 Sensor Heater Monitoring
EGR System Monitoring
4. Press
MON
to exit the Readiness Test and display the opening
screen.
R
EADINESS
T
EST
- OBD-II