AutoXray EZ-READ, Руководство пользователя

Страница: 21 / 64

Page 21
Before You Start
• Your vehicle must be scanned before viewing the KOEO
data. If
DATA
is pressed, and the vehicle has not been
scanned, the scanner will display
Press the Scan
key to Scan New Data
. Refer to “Key ON, Engine
OFF (KOEO) Scan” on page 17.
The EZ-Read scanner DOES NOT need to be connected to the
vehicle to view the scanned data. The vehicle engine configuration
and data will remain in the scanner’s memory until a vehicle is
scanned again. This allows you to review the data at a later time,
or to use PC-Link to load the data into a computer.
1. Press
POWER
to display the EZ-Read scanner opening
screen.
2. Press
DATA
to display the Data menu.
Make sure
1-KOEO Codes
is
highlighted, then press
ENTER
.
3. If no faults are detected during the
KOEO test, the vehicle’s computer will
store code 11 or code
111 System
Pass
.
If a fault is detected, the fault and its
description will be displayed on the scan-
ner screen. The fault code number will
be displayed in the upper left corner of
the screen.
• A down arrow on the screen indi-
cates more information. Use the
p
and
q
arrow keys to
view the additional text.
• Use the
t
and
u
arrow keys to view any other faults.
4. Press
DATA
to exit Data mode and display the opening screen.
V
IEW THE
KOEO D
ATA
- F
ORD