AutoXray EZ-READ, Руководство пользователя

Страница: 25 / 64

Page 25
6. Try wiggling the connector during the attempted scan.
7. Ensure the correct cable is being used.
Screen Contrast Problems
Some users have experienced problems concerning screen
contrast with newer batteries like the Duracell Ultra. These
batteries produce a higher than normal voltage and can affect
the EZ-Read screen contrast, making the screen difficult to read.
We apologize for the inconvenience. If you encounter this prob-
lem, run your EZ-Read for approximately 2 hours to run off the
high voltage causing the problem. (It will be necessary to press a
key occasionally to override the EZ-Read EZ-Read power miser
function.)
NOTE:
After these batteries reach their rated voltage (1.5V) the
battery life should still be approximately 500 hours.
How to Reset the EZ-Read
1. Power EZ-Read on.
2. Open the battery compartment and remove one battery.
3. Hold down
POWER
for 5 seconds.
4. Put the battery back in, and power on.
NOTE:
These steps will re-set the EZ-Read.
If your problem persists please contact AutoXray
technical support.
T
ROUBLESHOOTING
(C
ONT
.)