Page 11
4.
Use the
t
and
u
arrow keys to select
1-SAE
or
2-METRIC
then press
ENTER
to select the highlighted choice (or press
the
CONFIG
Key to Cancel and return to the initial screen).
Connect the EZ-Read to Your Vehicle
The EZ-Read EZ-Read communicates with the computer
and sensors in your vehicle through a special
connection cable. The EZ-Read cable is plugged into a
connector on the top of the EZ-Read, and
into a computer interface connection in your vehicle.
1.
Locate the vehicle computer connection:
•
[OBD-II / GM]
On OBD-II and GM vehicles, the connector
is usually located under the drivers side of the dashboard.
On some vehicles, the connector is located behind the kick
panels, ashtray, or radio.
•
[Ford / Chrysler 83-95]
The connector on Ford and Chrysler
vehicles is usually located in the engine
compartment, along the outside perimeter of the engine com-
partment, or by the shock absorber towers.
NOTE:
For additional connection location information, including the
“OBD Connector Locations Database,” please look
at the Customer Support page on the AutoXray
web site (www.autoxray.com ).
2.
Make sure that all the pins are straight and that the connecting
surfaces are free of oils, grease, and moisture.
CAUTION:
Do not force the cable connector into the scanner or
into the vehicle computer connection.
3.
Push the scanner cable and vehicle connectors together firmly.
•
[Ford]
The EEC-IV Ford connector has a trapezoid shaped
connector and a small square connector next to it. Make sure
S
ETUP
/ O
PERATING
I
NSTRUCTIONS
(C
ONT
.)
Содержание EZ-READ
Страница 1: ...USERS MANUAL EZ READ REVISION 2 1...
Страница 36: ...Page 36 NOTES...
Страница 37: ...Page 37 NOTES...
Страница 64: ...Page 64...
