manualshive.com logo in svg

Autonics PMC-1HS Series, Инструкция по эксплуатации, Страница: 48 / 82

Поделиться
Скачать
Autonics PMC-1HS Series Скачать руководство пользователя страница 48

5. Drive by PC

47

© Copyright Reserved Autonics Co., Ltd.

5.4 

Program Edit Screen

The program edit screen is used to display/edit the operation program of X or Y-axis.

The program is registered to registers from 0 to 63�

The program edit screen is consists of the program display part, the program input part and the parameter 

display part� The input or edit of the program is carried out in the program input part� If you click a certain 

register in the program display part, the selected register number is displayed in the REG field of the 

program input part� 

5.4.1   Input and edit a program

For the displayed register, input each item as shown below� Whenever you click the [Enter] button, data is 

displayed at the corresponding REG of the program display part and the register number is increased by 

one� In online state, the data is automatically added in the main body�

Input item

Command

Description

Command

Click (▼) to select the following commands.

ABS (move absolute position), OUT (ON/OFF of output port), 

IJP (jump input condition), INC (relative position movement), NOP (no operation),

OTP (ON pulse of output port), JMP (jump), HOM (home search),

REP (start repetition), TIM (timer), RPE (end repetition), END (end program)

Data

ABS

Absolute position

INC

Relative position

OUT

Output post number - 0 (Off)/1 (On)

OTP

Output post number - ON time (0 to 65,535 msec)

IJP

Input port number - register number to jump

JMP

Register number to jump

REP

Repetition count (1 to 255)

TIM

Waiting time (0 to 65,535 msec)

Other commands

Not required to configure

Speed

ABS, INC

Selection of drive speed 1 to 4

Other commands

Not required to configure

Timer

ABS, INC

Selection of post timer 1 to 3

If it is unnecessary, select zero�

Other commands

Not required to configure

Parameter

display part

Program

display part

Program 

input part

Содержание PMC-1HS Series



















































































Отзывы:

Нет отзывов