manualshive.com logo in svg

Autonics PMC-1HS Series, Инструкция по эксплуатации, Страница: 44 / 82

Поделиться
Скачать
Autonics PMC-1HS Series Скачать руководство пользователя страница 44

5. Drive by PC

43

© Copyright Reserved Autonics Co., Ltd.

⑩ 

Configuration of file management and communication

The file menu has the functions as listed in the table below. The data to be transmitted are the setting 

value of the parameter/mode screen and the program of the program edit screen� The data transmission 

from the main body can be sent all data together or some data�

File menu

Function

Operations

Open

Read a file

Data is read from a file on a disk.

The data opened is, also, written to the main body in On-line�

The extension name of the data file is *.nvd.

Save

Save a file

Data is stored in a disk along with its file name.

The extension name of the data file is *.nvd.

Upload

Read from

PMC-1HS/PMC-2HS

Data is read from the main body�

All                            All data

Program-All             All programs

Program-X-axis       Program data on X-axis

Program-Y-axis       Program data on Y-axis

Parameter-All          All parameter/mode

Parameter-X-axis    Parameter/mode on X-axis

Parameter-Y-axis    Parameter/mode on Y-axis

Caution

When starting operation program by online, it is uploaded 

automatically� 

Download

Add to

PMC-1HS/PMC-2HS

Data is added to the main body�

All                            All data

Program-All             All programs

Program-X-axis       Program data on X-axis

Program-Y-axis       Program data on Y-axis

Parameter-All          All parameter/mode

Parameter-X-axis    Parameter/mode on X-axis

Parameter-Y-axis    Parameter/mode on Y-axis

Caution  

If data is added or changed on the parameter/mode screen or 

the program edit screen in on-line, the data is automatically 

added to the main body�

In the Option menu, you can mark serial communication port and select communication speed�

The serial communication port that your PC can use is displayed in COM port numbers.
For communication, the COM port must be marked. 
In USB communication, if you select "My Computer → Properties (click your right mouse button) → 

Hardware → Device Manager", you can check the COM port to be allocated next to "Prolific USB-to-

Serial Comm Port" in Port (COM and LPT). 

The communication speed has the range from 9,600 to 115,200 bps� The Factory default is 9,600bps� 

Faster communication speed makes faster response of the main body but is subject to receive the 

influence of noise. 

The Help menu indicates the version of the main body or the operation program� The top end and the 

bottom end indicate the versions of the main body and the operation program respectively (Version: 

******* and Version of app: *******).

⑪ 

Main body reset

This function is used to reset PMC-1HS/PMC-2HS main body.

Содержание PMC-1HS Series



















































































Отзывы:

Нет отзывов