background image

6

SecuraLift® Rhino 

Installation Instructions & Owner’s Manual

Operation

To open or close the door simply press a button on a TrioCode™ handheld 
transmitter, or optional wall switch for two seconds. During open and close cycles 
the door can be stopped by pressing the button again. The next actuation will 
move the reverse the door’s  direction.

Powerful 1/2H.P. (0.370kW) Suspended Motor

Powerful enough for even the largest and heaviest of doors, the SecuraLift® 
Rhino Overhead Garage Door Opener has a unique internal motor mounting that 
reduces vibration, and ultimately operating noise.

Anti-travel electronic brake

The SecuraLift® Rhino Overhead Garage Door Opener features an anti-travel 
electronic brake mechanism to ensure the opener stops the door exactly at the set 
limit location.  This is of particular importance to large and heavy doors which build 
up greater momentum when moving.

TrioCode™ Code Hopping Technology

Every time a TrioCode™ transmitter is used a new security code is randomly generated 
from over 4.29 billion possibilities. This greatly enhances the security of the system and 
makes “code grabbing” a thing of the past

These transmitters also overcome interference issues by simultaneously sending a signal over three 
slightly different frequencies.  Even if two of the three signals are jammed, the system will still work.

Microswitch Limits

Allows for fi ne adjustment of set limits via a user-friendly tactile interface.

ISS (Intelligent Safety obstruction System)

While the door is performing a close cycle, should it hit an obstacle or be restricted in some manner, it 
will automatically reverse. The amount of force the door should encounter before reversing is automatically 
adjusted during the initial installation of the opener. The door will also stop if restricted whilst opening. The 
Safety Obstruction Force should be checked at least once a month. See page 19 for instructions.

Features

Thank you for purchasing the 

SecuraLift® Rhino

 

Overhead Garage Door Opener. Designed to suit 
sectional, overhead and one piece tilt up doors, the 
components and materials used ensure this opener 
will provide years of smart, simple and secure 
operation. Listed below are just some of the 
many world leading features:

Содержание SecuraLift Rhino





































Отзывы: