30
SecuraLift® Rhino
Installation Instructions & Owner’s Manual
Maintenance
Maintenance
The SERVICE LED will indicate the requirement for
a service and/or adjustment. To reset the SERVICE
LED when the door is serviced, reprogram the
Door Travel Limits and the Door Travel Force – on
completion of this programming the SERVICE LED
will go out.
Whilst your opener does not require any periodic
maintenance, the door that it is fi tted to does. Your
garage door is a large, heavy, moving object and
should be tested regularly to ensure it is in good
condition. A poorly maintained door could cause fatal
or serious injuries or serious damage to property.
To ensure a long and trouble free life for your opener
the following is recommended:
Monthly
Disengage the opener and manually operate
the door: The door must be smooth to operate
by hand. An operating force on the bottom rail
should not exceed 150N (15kg) force.
Each month check that the opener reverses
when the door contacts a 50mm high object
placed on the fl oor (AS3350). Refer to Testing
the Safety System (Step 16).
NOTE:
If the door does not operate smoothly, call
your installer.
•
•
Yearly
Automatic Technology suggests you contact your installer
to perform an annual door service.
CAUTION:
Frequently examine door, particularly
cables, springs and mountings for signs of
wear, damage or imbalance. Do not use if repair or
adjustment is needed since a fault in the installation or
an incorrectly balanced door may cause injury. (AS3350)
Adjustments should only be carried out by
experienced persons, as this function can
be dangerous if not performed under strict safety
procedures.
WARNING!
Failure to maintain your garage
door may void the warranty on your garage door
opener.
Warranty Expired Indicator
When the opener reaches the number of cycles covered
by warranty the courtesy light will fl ash 10 times after each
operation to indicate that the warranty has expired. This
fl ashing will continue for twenty (20) operations unless
the user acknowledges the warranty expiry indicator and
stops the light from fl ashing. To stop the courtesy light
fl ashing press the LIMIT SET button while the light is
fl ashing after an operation.
