Automatic Technology MegaCode, Руководство по установке

Страница: 6 / 23

6 MegaCode® Receiver Owner Installation Instructions
Operating Controls
AC/DC Power Supply Input
12 to 24 AC/DC power supply input terminal.
Output One (1)
normally open contacts of the solid state relay output can be controlled by remote
control transmitters, wired inputs and a programmable time clock.
Output Two (2)
normally open contacts of the solid state relay output can be controlled by remote
control transmitters, wired inputs and a programmable time clock.
Output Three (3)
normally open contacts of the solid state relay output can be controlled by remote
control transmitters, wired inputs and a programmable time clock.
Output Four (4)
normally open contacts of the solid state relay output can be controlled by remote
control transmitters, wired inputs and a programmable time clock.
Trigger Input One (1)
the output one (1) can also be controlled via trigger one (1) independently. The
trigger input can be programmed to activate its output similar to a transmitter button.
Trigger Input Two (2)
the output two (2) can also be controlled via trigger two (2) independently. The
trigger input can be programmed to activate its output similar to a transmitter button.
Trigger Input Three (3)
the output three (3) can also be controlled via trigger three (3) independently.
The trigger input can be programmed to activate its output similar to a transmitter button.
Trigger Input Four (4)
the output four (4) can also be controlled via trigger four (4) independently. The
trigger input can be programmed to activate its output similar to a transmitter button.
Disable Input One (1)
activation of this input will disable Output One (1)
Disable Input Two (2)
activation of this input will disable Output Two (2)
Disable Input Three (3)
activation of this input will disable Output Three (3)
Disable Input Four (4)
activation of this input will disable Output Four (4)
AC/DC Power Supply plug pack Input
12 to 24 AC/DC power supply input
Antenna connector
Clock Battery
Prog Input
is used to connect the Automatic Technology Handheld Programmer for editing control and
receiver functions, accessing diagnostic tools, and activating special features and operating modes.
01 02
03 04
05 06
07 08
09 10
11 12
14 13
15 16
17 18
19 20
21 22
23 24
25 26
27
28
29
30