12
MegaCode® Receiver
Owner Installation Instructions
Transmitter Management
16
fi g
18
fi g
19
fi g
17
fi g
Selecting an Operation
Press NEXT or PREV to cycle through the four menu
options
(Fig. 16-19)
. Press EXIT to return to the list.
Press SET to execute the menu’s operation.
Menu 1.1 Code Operation (location empty)
If the code operation is selected on an empty
transmitter location, the code transmitter procedure
will be initiated with the transmitter being saved in
the selected location. This is useful when managing
transmitters using a scheme which ties the store
location to the transmitter’s owner.
Menu 1.1 Code Operation (location used)
If the code operation is selected for a location
that already contains a transmitter, then the code
transmitter procedure will be initiated and the new
transmitter will replace the existing one. Note that the
button functions and name of the existing transmitter
will be transferred to the new transmitter. This
procedure is of great convenience when replacing
a lost transmitter.
Menu 1.2 Delete Operation
The delete operation is used to remove a transmitter
from memory along with the name and button function
settings.
Menu 1.3 Edit Operation
The edit operation displays the transmitter record for
editing purposes.
Editing The Button Function Fields
Select the desired fi eld by using NEXT or PREV to
move the cursor.
Use UP and DOWN to change the displayed
value. When the correct setting has been made
repeat step i (above) to select the next fi eld to
edit. The example
(Fig. 19)
shows editing the
function of transmitter number 510 assigned to
the Output 1.
Available functions:
M_# (Mimic)
P_# (Pulse)
PR# (Pulse/Reset)
T_# (Toggle)
S_# (Set)
R_# (Reset)
VAC (Vacation)
−−− (OFF)
Where # is the output number M_1,M_2, M_3,M_4
Press SET to save the settings
(Fig. 8)
or EXIT to abort
without saving.
i.
ii.
MENU 1.1
Code Tx# 312
MENU 1.2
Delete Tx# 312
MENU 1.3
Edit Tx# 312
510 I
D
[ No Name]
M_
∆
T_4 R_1 S_2
