manualshive.com logo in svg

Automatic Technology MegaCode, Руководство по установке

Поделиться
Скачать
Automatic Technology MegaCode Скачать руководство пользователя страница 15

 

Owner Installation Instructions 

MegaCode® Receiver

15

Menu 2. Output One Setup 

The output setup parameters in Menu 2 is used to confi gure Output One.

Menu 2.1: Output Pulse Time

This parameter sets the duration of the output pulse time. The output pulse time is used only for pulse 
functions. The time is adjustable from 0.1 to 99.9 units. 

Menu 2.2: Pulse Time Units

This parameter sets the units used for the output time settings. The options are Sec, Min or Hrs.

Menu 2.3: Flash On Time & Menu 2.4: Flash Off Time

A fl ash on an output is created by repeatedly turning the output on and off. The Flash On Time sets the 
duration of the on phase while the Flash Off Time sets the duration of the off phase. For a steady output state 
which does not fl ash, set the Flash On Time = 0.0s. The Flash Off Time is not used for steady state outputs.

Menu 2.5: Complete Flash Sequence

Turning this parameter on will allow the fl ash cycle to complete if the output is turned off during the fl ash cycle.

Menu 2.6: Output One Inverted

Output One is confi gured for N/O operation. This parameter allows its operation to be changed to N/C.

Menu 2.7: Trigger One Input

Output One can also be controlled via independent Trigger One input. The trigger input can be programmed to 
activate its output similar to a transmitter button. 

Menu 2.8: Trigger One Input Contact

Trigger One input is confi gured for N/O operation. This parameter allows its operation to be changed to N/C.

Menu 2.9: Disable One Input Contact

This input can be used to disable the output in software regardless of the state of the transmitters, wired inputs 
or time clock.The disable input is normally confi gured for N/O operation. This parameter allows its operation to be 
changed to N/C.

Menu 3 Output Two Setup

Menu 3. Output Two Setup 

The output setup parameters in Menu 3 is used to confi gure Output Two.

Menu 3.1: Output Pulse Time

This parameter sets the duration of the output pulse time. The output pulse time is used only for pulse 
functions. The time is adjustable from 0.1 to 99.9 units. 

Menu 3.2: Pulse Time Units

This parameter sets the units used for the output time settings. The options are Sec, Min or Hrs.

Menu 3.3: Flash On Time & Menu 3.4: Flash Off Time

A fl ash on an output is created by repeatedly turning the output on and off. The Flash On Time sets the 
duration of the on phase while the Flash Off Time sets the duration of the off phase. For a steady output state 
which does not fl ash, set the Flash On Time = 0.0s. The Flash Off Time is not used for steady state outputs.

Menu 3.5: Complete Flash Sequence

Turning this parameter on will allow the fl ash cycle to complete if the output is turned off during the fl ash cycle.

Menu 2 Output One Setup

Содержание MegaCode
























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды