20
MegaCode® Receiver
Owner Installation Instructions
The Memory Tools accessed from within Menu 9
(Fig.
33)
are used to clear the controller’s. memory. Once
selected, the PREV or NEXT buttons can be used
to view the Memory Tool options. To execute the
displayed option simply press SET.
Menu 9.1 Clr control
This option will clear the MegaCode® receivers
memory and reload the factory set defaults for
parameters.
Menu 9.2 Clr tx’ers
This option will clear the transmitter storage memory.
Menu 9 Memory Tools
MENU 9
Memory Tools
33
fi g
31
fi g
32
fi g
Used = 15
Free = 496
3 F= M_1
Event# 64
Menu 8.3 Display history
The MegaCode® keeps a record of the last 64 events
that have taken place. The events include outputs
turning off & on and by what cause, power failures etc.
When this tool is selected, a screen displays the last
event that occurred. The NEXT and PREV buttons can
be used to view each event. The “EVENT#” fi eld shows
the sequence of the events, with 64 being the fi rst and 1
being the last. The example
(Fig. 31)
shows that the last
event was “output 1 was triggered by the transmitter #
3”. When fi nished viewing the events, simply press EXIT.
Menu 8.4 Memory usage
This tool displays the number of transmitter store
location used and the number free
(Fig. 32)
.
Menu 8.5 Console Test
This tool allows to test the console buttons and the
beeper.
